PL-6020

Plasma and gas-oxygen cutting machine with CNC PL-6020 are made for automatic cutting of carbonic, stainless, and alloyed steel and non-ferrous metals. Big working place ensures the possibility to process the plates of 6000×2000 mm dimensions. The basic configuration of this model has the source of plasma-arc cutting PowerMax-105. The gas-oxygen torch is additionally installed to cut the plates the depth of which is more than 25 mm. The powerful portal frame and rail track of the machine guarantee solid and steady operation in the industrial condition. The sectional water-filled table significantly reduces the pollution of the atmosphere with cutting wastes. The combination of the right mechanic of the machine PL-6020 gives the soft movement and long service life.

Design Moving gantry
Worktable (X×Y) 2000×6000 mm
Axes travel range (X×Y) 2000×6000 mm
Table structure Six sectional (with the possibility of water)
Guideways Square type
Transmission type, X,Y axes Helical rack
Feed motors X,Y,Z Stepper motor
Re-positioning accuracy 0.05 mm
Maximum travel speed, X,Y axes 15 m/min
Feed rate * 1-15 m/min
Plasma Source Manufacturer Hypertherm PowerMax
Current source model 105A | 125A
Current adjustment Manual
Control system Start MicroStep
Height control system AVC118
Maximum cutting plasma cutting 38 mm
Maximum cutting gas-oxygen cutting 100 mm
Diameter of drilling, maximum Steel – 13 mm, Aluminum – 16 mm
Software Built-in library of standard nesting shapes
Plasma power supply voltage 380 V, 50 Hz
Supply voltage 220 V, 50 Hz
Maximum power consumption 10 – 25 kW
Overall dimensions (L×W×H) 7000×2500×1800 mm
Net weight 1100 kg

* The working speed of movement depends on the properties of the material, its thickness and the established current.

Maximum cutting thickness, mm Plasma cutting system
Low carbon steel Stainless steel Aluminum
with punching when inserting from the edge with punching when inserting from the edge with punching when inserting from the edge
22 38 20 32 20 32 Powermax105
25 44 22 40 25 40 Powermax125
  • Plasma source power increase
  • Air compressor
  • Increased working area
  • A set of additional consumables