PL-3015D
PL-3015.D is a professional multi-production machine tool of plasma-arc cutting and crossbar drilling designed to work at the enterprises with a heavy load and high-level automatization. The main advantage is working water-filled table with automatic level control, intense plasma source of PowerMax 105, a node with crossbar holes drilling, protected industrial CNC post. In order to ensure the long service life of the machine tool, all the mechanical engineering assemblies are protected by goffer protectors.
| Design | Moving gantry |
| Worktable (X×Y) | 1500×3000 mm |
| Axes travel range (X×Y) | 1500×3000 mm |
| Table structure | Lamellas |
| Guideways | Square type |
| Transmission type, X,Y axes | Helical rack |
| Feed motors X,Y,Z | Stepper motor |
| Maximum travel speed, X,Y axes | 20 m/min |
| Feed rate * | 1-20 m/min |
| Plasma Source Manufacturer | Hypertherm PowerMax |
| Current source model | 105A | 125A |
| Current adjustment | Manual |
| Control system | StarFire 2100.S |
| Software | Built-in library of standard nesting shapes |
| Drilling unit | QD3 |
| Chuck diameter | 0,8-13 mm |
| Diameter of drilling, maximum | Steel – 13 mm, Aluminum – 16 mm |
| Threading | Steel – M16, Aluminum – M20 |
| Turnovers | 1300 rpm |
| Plasma power supply voltage | 380 V, 50 Hz |
| Supply voltage | 220 V, 50 Hz |
| Maximum power consumption | 10 – 25 kW |
| Overall dimensions (L×W×H) | 3400×2100×1300 mm |
| Net weight | 1500 kg |
* The working speed of movement depends on the properties of the material, its thickness and the established current.
| Maximum cutting thickness, mm | Plasma cutting system | |||||
| Low carbon steel | Stainless steel | Aluminum | ||||
| with punching | when inserting from the edge | with punching | when inserting from the edge | with punching | when inserting from the edge | |
| 22 | 38 | 20 | 32 | 20 | 32 | Powermax105 |
| 25 | 44 | 22 | 40 | 25 | 40 | Powermax125 |
- Plasma source power increase
- Air compressor
- A set of additional consumables
