LS-2515
Laser center LS–2515 is a large size machine. By means of workpiece range of 2500×1500 mm allowing processing the large-sized materials. Powerful 150-Watt laser, cooling product system «CW-5200» (chiller), reliable mechanics and stiffness of the structure maintain high reliability, accuracy, and materials processing rate. The built-in smoke-exhaust system creates favorable conditions for working on equipment; and prevent the origin of diseases of the personnel caused by breathing-in combustion products.
| Machine type | CO2 laser |
| Design | Moving gantry |
| Worktable (X×Y) | 1500×2500 mm |
| Axes travel range (X×Y) | 1500×2500 mm |
| Table structure | Anodized aluminum lamellas |
| Guideways | Square type |
| Transmission type, X,Y axes | Gear belts HDT 3M |
| Feed motors X,Y,Z | Stepper motor |
| Maximum travel speed, X,Y axes | 500 mm/sec |
| Feed rate * | 1-500 mm/sec |
| Laser power | 150 W |
| Tube cooling | Chiller CW5000 |
| Laser power adjustment | Programme |
| Control system | Ruida |
| Software | RDWorks |
| Collector pipe diameter | 150 mm |
| Collector capacity | 960 m3/h |
| Air pump | 5.7 m3/h, 0.8 Bar |
| Supply voltage | 220 V, 50 Hz |
| Maximum power consumption | 2 kW |
| Overall dimensions (L×W×H) | 3350×2060×1150 mm |
| Net weight | 500 kg |
* The working speed of movement depends on the properties of the material, its thickness and the power of the laser beam.
Cutting/Engraving
- Wood
- Cardboard and paper
- MDF and Chipboard Paronite
- Rubber
- Plexiglas, acrylic, polystyrene, PET
- Double-layer plastics
- Monolithic polycarbonate
- Fur
- Fabrics / textiles
- Leather and leatherette
Engraving
- Stainless steel
- Stone, granite, marble
- Increase tube power – up to 180 W
- A set of additional consumables
