ATS-4020
The CNC-type milling machine ATS-4020 is a tool of a large size designed for milling and patterns cutting. One of the main advantages is a working table of 4100×2100 mm dimensions allowing working with the number of standard sheet sizes like medium-density fiberboard, wood chipboard, veneer wood, polyvinyl chloride, acryl, etc. The processing of the solid plate without prior nesting simplifies the milling process and saves time.
| Machine type | CNC Router |
| Design | Moving gantry |
| Worktable (X×Y) | 2100×4100 mm |
| Axes travel range (X×Y×Z) | 2100×4100×200 mm |
| Distance from spindle nut to table | 200 mm |
| Table structure | Aluminum T-slot |
| Guideways | Square type |
| Transmission type, Z axis | Ballscrew |
| Transmission type, X,Y axes | Helical rack |
| Reducer type, X,Y axes | Belt |
| Feed motors X,Y,Z | Stepper motor |
| Maximum travel speed, Z axis | 6 m/min |
| Maximum travel speed, X,Y axes | 20 m/min |
| Feed rate * | 0-18 m/min |
| Spindle power | 4.5 kW (6.0 kW) |
| Spindle rpm | 6 000-18 000 rpm |
| Spindle cooling | Air |
| Tool change | Manual |
| Collet type (maximum shank diameter) | ER32 (20 mm) |
| Tool length caliber | Contact type |
| Limit sensors | Inductive, sealed |
| Controller (CNC) | Ncstudio |
| Programming language | G-Code |
| Dust collector pipe diameter | 120 mm |
| Dust collector capacity | 3200 m3/h |
| Supply voltage | 380 V, 50 Hz |
| Maximum power consumption | 7 kW |
| Overall dimensions (L×W×H) | 4800×2700×1700 мм |
| Net weight | 1500 kg |
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
Machine is designed for high-quality milling and engraving of material surfaces.
Main areas of application of the machine:
Furniture production:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Model production:
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Vacuum table (pump 5.5 kW included) ?
- Swivel axis – length – 1200 mm, diameter – 200 mm ?
- Mobile CNC Stand ?
- Increasing the number of working spindles ?
- 4-axis controller
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- CNC system “NC-Studio – 8”
- PC kit (for “NC-Studio – 8”): system unit, monitor, mouse, keyboard
- Aspiration system
- Increasing the stroke along the Z axis up to 300mm
- Automatic lubrication mechanics
