The CNC-type milling machine ATS-3020 is a tool of a large size designed for milling and patterns cutting. One of the main advantages is a working table of 3100×2100 mm dimensions allowing working with the number of standard sheet sizes like medium-density fiberboard, wood chipboard, veneer wood, polyvinyl chloride, acryl, etc. The processing of the solid plate without prior nesting simplifies the milling process and saves time.
|Machine type||CNC Router|
|Worktable (X×Y)||2100×3100 mm|
|Axes travel range (X×Y×Z)||2100×3100×200 mm|
|Distance from spindle nut to table||200 mm|
|Table structure||Aluminum T-slot|
|Transmission type, Z axis||Ballscrew|
|Transmission type, X,Y axes||Helical rack|
|Reducer type, X,Y axes||Belt|
|Feed motors X,Y,Z||Stepper motor|
|Re-positioning accuracy||0.05 mm|
|Maximum travel speed, Z axis||6 m/min|
|Maximum travel speed, X,Y axes||20 m/min|
|Feed rate *||0-18 m/min|
|Spindle power||4.5 kW|
|Spindle rpm||6 000-18 000 rpm|
|Collet type (maximum shank diameter)||ER32 (20 mm)|
|Tool length caliber||Contact type|
|Limit sensors||Inductive, sealed|
|Dust collector pipe diameter||120 mm|
|Dust collector capacity||3200 m2/h|
|Supply voltage||380 V, 50 Hz|
|Maximum power consumption||7 kW|
|Overall dimensions (L×W×H)||3800×2700×1700 mm|
|Net weight||1100 kg|
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
Main areas of application of the machine:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Vacuum table (pump 5.5 kW included) 🢡
- Swivel axis – length – 1200 mm, diameter – 200 mm 🢡
- Mobile CNC Stand 🢡
- Increasing the number of working spindles 🢡
- 4-axis controller
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- CNC system “NC-Studio – 8”
- PC kit (for “NC-Studio – 8”): system unit, monitor, mouse, keyboard
- Aspiration system
- Increasing the stroke along the Z axis up to 300mm
- Increase the working stroke of the machine along the X axis up to 1500mm