The milling machine ATS-3020.Auto has an automatic changeover and tool sensing systems. This function reduces the time needed for multifunctional details processing. The furniture market is specifically interested in this milling machine. The reason is that it works under Nesting technology excluding the additional mills as panel sizing saw, drilling machine, CNC saw center. This tool is able to perform all necessary operations like cutting, milling, and drilling of the material per set-up.
|Machine type||CNC Router|
|Worktable (X×Y)||2100×3100 mm|
|Axes travel range (X×Y×Z)||2100×3100×200 mm|
|Distance from spindle nut to table||200 mm|
|Table structure||Aluminum T-slot|
|Transmission type, Z axis||Ballscrew|
|Transmission type, X,Y axes||Helical rack|
|Reducer type, X,Y axes||Planetary|
|Feed motors X,Y,Z||Stepper motor|
|Maximum travel speed, Z axis||6 m/min|
|Maximum travel speed, X,Y axes||20 m/min|
|Feed rate *||0-18 m/min|
|Spindle power||7.5 kW|
|Spindle rpm||6 000-24 000 rpm|
|Tool magazine type||Linear|
|Tool magazine capacity **||4 pcs. ISO 30 type|
|Collet type (maximum shank diameter)||ER32 (20 mm)|
|Tool length caliber||Contact type, automatic|
|Limit sensors||Inductive, sealed|
|Dust collector pipe diameter||120 mm|
|Dust collector capacity||3200 m3/h|
|Supply voltage||380 V, 50 Hz|
|Maximum power consumption||10 kW|
|Overall dimensions (L×W×H)||3800×2700×1700 mm|
|Net weight||1200 kg|
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
** It is possible to increase magazine capacity by request.
Main areas of application of the machine:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Vacuum table (pump 5.5 kW included) ?
- Swivel axis – length – 1200 mm, diameter – 200 mm ?
- Increasing the number of working spindles ?
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- PC kit: system unit, monitor, mouse, keyboard
- Aspiration system
- Increasing the stroke along the Z axis up to 300mm
- Automatic lubrication mechanics
- 4-axis controller
- Additional tool