The model of the milling machine ATS-2513 is one of the most highly demanded models among our clients. The main reasons why our clients choose this model are the working table with 2500×1300 mm dimensions and the Italian spindle of 4,5 kW power capacity. This milling machine resolves a wide range of problems asked to be fixed by the customers. If you are searching for an efficient and reasonably priced milling machine, then the ATS-2513 machine is exactly what you need. This model is a golden mean.
|Machine type||CNC Router|
|Worktable (X×Y)||1300×2500 mm|
|Axes travel range (X×Y×Z)||1300×2500×200 mm|
|Distance from spindle nut to table||200 mm|
|Table structure||Aluminum T-slot|
|Transmission type, Z axis||Ballscrew|
|Transmission type, X,Y axes||Helical rack|
|Reducer type, X,Y axes||Belt|
|Feed motors X,Y,Z||Stepper motor|
|Maximum travel speed, Z axis||6 m/min|
|Maximum travel speed, X,Y axes||20 m/min|
|Feed rate *||0-18 m/min|
|Spindle power||4.5 kW|
|Spindle rpm||6 000-18 000 rpm|
|Collet type (maximum shank diameter)||ER32 (20 mm)|
|Tool length caliber||Contact type, automatic|
|Limit sensors||Inductive, sealed|
|Dust collector pipe diameter||120 mm|
|Dust collector capacity||3200 m3/h|
|Supply voltage||380 V, 50 Hz|
|Maximum power consumption||7 kW|
|Overall dimensions (L×W×H)||3100×1900×1700 mm|
|Net weight||860 kg|
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
Main areas of application of the machine:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Vacuum table (pump 5.5 kW included) ?
- Swivel axis – length – 1200 mm, diameter – 200 mm ?
- Mobile CNC Stand ?
- Increasing the number of working spindles ?
- 4-axis controller
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- CNC system “NC-Studio – 8”
- PC kit (for “NC-Studio – 8”): system unit, monitor, mouse, keyboard
- Aspiration system
- Increasing the stroke along the Z axis up to 300mm
- Increase the working stroke of the machine along the X axis up to 1500mm
- Automatic lubrication mechanics