ATS-2513.4D
The milling machine ATS-2513.4D is unique engineering research of our company. High-precision mechanics and programmed numerical control with four axial interpolations dramatically empower this milling machine. The indexable spindle along an axis B enables the processing of the radial furniture frontage of different shapes. This mill is used for front milling and raw part drilling as well. In addition, the milling machine can have hardware and software package “Skan-Fasad” as a set. This package automatically scans the working surface of the frontage and hasten the managing programs preparation. This function reduces the time needed for multifunctional details processing.

Machine type | CNC Router |
Design | Moving gantry |
Worktable (X×Y) | 1300×2500 mm |
Axes travel range (X×Y×Z) | 1500×2500×380 mm |
Spindle tilt angle, B axis | ± 90º |
Distance from spindle nut to table | 380 mm |
Table structure | Aluminum T-slot |
Guideways | Square type |
Transmission type, Z axis | Ballscrew |
Transmission type, X,Y axes | Helical rack |
Reducer type, X,Y axes | Planetary |
Reducer type, B axis | Wave |
Feed motors X,Y,Z | Stepper motor |
Maximum travel speed, Z axis | 6 m/min |
Maximum travel speed, X,Y axes | 20 m/min |
Feed rate * | 0-18 m/min |
Spindle power | 4.5 kW |
Spindle rpm | 6 000-18 000 rpm |
Spindle cooling | Air |
Tool change | Manual |
Collet type (maximum shank diameter) | ER32 (20 mm) |
Tool length caliber | Contact type, automatic |
Limit sensors | Inductive, sealed |
Controller (CNC) | Ncstudio |
Programming language | G-Code |
Dust collector pipe diameter | 120 mm |
Dust collector capacity | 3200 m3/h |
Supply voltage | 380 V, 50 Hz |
Maximum power consumption | 7 kW |
Overall dimensions (L×W×H) | 3400×2100×2300 mm |
Net weight | 1100 kg |
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
Machine is designed for high-quality milling and engraving of material surfaces.
Main areas of application of the machine:
Furniture production:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Model production:
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Software-hardware complex “Scan-Facade” ?
- Vacuum table (pump 5.5 kW included) ?
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- PC kit: system unit, monitor, mouse, keyboard
- Aspiration system
- Equipment for fixing blanks of curved facades