ATS-2112.D
The CNC milling machine “ATS-2112.D” is ideally suited for furniture productions. This machine is an interesting stroke, designed for the possibility of milling door trim. The milling machine is equipped with the additional device for fixing of door cloths that allows to do milling under the lock and loops.
Also, this model of machine is actively used in the market of outdoor advertising, for cutting plastics and composite materials.
The machine is efficient due to the spindle power of 4.5 kW made in Italy and high processing speed.


Machine type | CNC Router |
Design | Moving gantry |
Worktable (X×Y) | 1200×2100 mm |
Axes travel range (X×Y×Z) | 1200×2100×200 mm |
Distance from spindle nut to table | 300 mm |
Table structure | Aluminum T-slot |
Guideways | Square type |
Transmission type, Z axis | Ballscrew |
Transmission type, X,Y axes | Helical rack |
Reducer type, X,Y axes | Belt |
Feed motors X,Y,Z | Stepper motor / Servo |
Maximum travel speed, Z axis | 6 m/min |
Maximum travel speed, X,Y axes | 20 m/min |
Feed rate * | 0-18 m/min |
Spindle power | 4.5 kW (6.0 kW) |
Spindle rpm | 6 000-18 000 rpm |
Spindle cooling | Air |
Tool change | Manual |
Collet type (maximum shank diameter) | ER32 (20 mm) |
Tool length caliber | Contact type |
Limit sensors | Inductive, sealed |
Controller (CNC) | NCStudio |
Programming language | G-Code |
Dust collector pipe diameter | 120 mm |
Dust collector capacity | 3200 m3/h |
Supply voltage | 380 V, 50 Hz |
Maximum power consumption | 7 kw |
Overall dimensions (L×W×H) | 2630×2330×1850 mm |
Net weight | 950 kg |
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
Machine is designed for high-quality milling and engraving of material surfaces.
Main areas of application of the machine:
Furniture production:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Model production:
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
Main areas of application of the machine:
Furniture production:
Kitchen facades, wardrobes, headboards, interior and exterior doors, various door linings made of MDF.
Curved cutting MDF, chipboard, OSB, plywood of various types.
Carpentry production: Bas-reliefs, balusters, candelabra, stairs, baseboards with elements of artistic carving.
Milling hard woods such as oak, beech, ash, poplar, acacia.
Model production:
Making master models, various forms for vacuum forming.
Production of outdoor advertising:
Production of signs, logos, emblems; engraving of various plastics for the manufacture of stands, plates, business cards. Processing of all types of materials used in the production of outdoor advertising: PVC, polystyrene, polycarbonate, artificial stone, acrylic glass, plexiglass, composites.
Production of facade systems:
Design of building facades, milling of composite cassettes and structural aluminum profile. Coordinate drilling and curvilinear cutting of the material.
- Vacuum table (pump 5.5 kW included) ?
- Swivel axis – length – 1200 mm, diameter – 200 mm ?
- Mobile CNC Stand ?
- Increasing the number of working spindles ?
- Servo set (servo drive on all axes, planetary reducer, helical rail of the increased accuracy, the shielded cable production)
- CNC system “NC-Studio – 8”
- PC kit (for “NC-Studio – 8”): system unit, monitor, mouse, keyboard
- Aspiration system
- Increasing the stroke along the Z axis up to 300mm