The milling machine «ATS-0609» is as good as machines with generous workpiece range, yet owing to its small size and weight, it can be used in small workshops, laboratories, and educational organizations.
For the manufacturing plants, usage of large-size CNC machines is not always cost-effective if producing small size products (like carved wall outlets, moderate size mirror frames, plastic tablets and so on).
In this case, model «ATS-0609» will be relevant as it cuts down the unit cost (thanks to low energy consumption) and gives the opportunity for large-size machines to manufacture the units that correspond to their sizes.
|Machine type||CNC Router|
|Worktable (X×Y)||600×900 mm|
|Axes travel range (X×Y×Z)||600×900×150 mm|
|Distance from spindle nut to table||150 mm|
|Table structure||Aluminum T-slot|
|Transmission type, Z,X,Y axes||Ballscrew|
|Feed motors X,Y,Z||Stepper motor|
|Re-positioning accuracy||0.05 mm|
|Maximum travel speed, Z axis||3 m/min|
|Maximum travel speed, X,Y axes||6 m/min|
|Feed rate *||0-5 m/min|
|Spindle power||1.5 kW|
|Spindle rpm||6 000-24 000 rpm|
|Spindle cooling **||Liquid|
|Collet type (maximum shank diameter)||ER11 (6 mm)|
|Tool length caliber||Contact type, automatic|
|Limit sensors||Inductive, sealed|
|Dust collector pipe diameter||100 mm|
|Dust collector capacity||1500 m2/h|
|Supply voltage||220 V, 50 Hz|
|Maximum power consumption||2.5 kW|
|Overall dimensions (L×W×H)||1260×980×1450 mm|
|Net weight||180 kg|
* Feed Rate depends on the material type, cutting depth, milling strategy, spindle speed and the quality of the tool used.
** Depending on the configuration, the machine can be equipped with a spindle with liquid or air cooling.